How to Fix Drywall Screws Popping Out

Drywall screws are designed to hold drywall firmly in place, but sometimes they can pop out, leaving unsightly bumps on your walls. This can happen due to a variety of reasons, including improper installation, shifting of the drywall, or changes in temperature and humidity. Whatever the cause, fixing popped-out drywall screws is a simple process that you can do yourself. Here is a step-by-step guide on how to fix drywall screws popping out.

Step 1: Locate the Popped-Out Screw
The first step is to locate the popped-out screw. This is usually easy to spot, as it will be protruding from the wall and may have caused a small bump or crack in the drywall. Once you have located the screw, use a screwdriver to remove it from the wall.

Step 2: Fill the Hole with Spackle
After removing the screw, you will be left with a small hole in the drywall. To fill this hole, use a putty knife to apply spackle to the area. Make sure to apply enough spackle to completely fill the hole and smooth it out as much as possible. Allow the spackle to dry completely before moving on to the next step.

Step 3: Sand the Spackle
Once the spackle has dried completely, use a fine-grit sandpaper to sand the area smooth. This will help to blend the spackle in with the surrounding drywall and create a seamless finish.

Step 4: Install a New Screw
After sanding the spackle, you can now install a new screw in the same location as the popped-out screw. Make sure to use a screw that is the same size and length as the original screw. Use a screwdriver to drive the new screw into the wall until it is flush with the surface of the drywall.

Step 5: Finish the Repair
Once the new screw is in place, use spackle to cover the screw head and any other imperfections in the wall. Apply the spackle with a putty knife and smooth it out as much as possible. Allow the spackle to dry completely before sanding it smooth.

Step 6: Paint the Wall
Finally, paint the repaired area to match the surrounding wall. Use a paintbrush or roller to apply a coat of paint over the repaired area, and allow it to dry completely before adding additional coats if necessary.

In conclusion, fixing drywall screws popping out is a simple process that can be done with just a few tools and materials. By following these steps, you can repair any popped-out screws in your drywall and restore your walls to their original smooth and flawless appearance.