How to Repair Drywall Holes in Corners

Drywall holes in corners can be a common problem in homes, especially if you have children or pets. Fortunately, repairing these holes is a relatively easy process that you can do yourself with a few simple steps. Here's how to repair drywall holes in corners:

Step 1: Clean the Area
Before beginning the repair process, you need to clean the area around the hole. Use a dry cloth to remove any dust or debris from the hole and the surrounding area.

Step 2: Cut a Patch
To repair the hole, you will need to cut a patch of drywall. Measure the size of the hole and cut a piece of drywall that is slightly larger than the hole.

Step 3: Apply Joint Compound
Apply a thin layer of joint compound around the hole using a putty knife. Be sure to spread the compound evenly and smooth out any bumps or ridges.

Step 4: Place the Patch
Place the patch over the hole and press it firmly into the joint compound. Use your putty knife to smooth out any air bubbles or excess compound around the edges of the patch.

Step 5: Apply More Joint Compound
Apply another layer of joint compound over the patch, extending it out about 2 inches beyond the edges of the patch. Use your putty knife to smooth out the compound and blend it into the surrounding area.

Step 6: Sand the Area
Once the joint compound is dry, use a fine-grit sandpaper to sand the area smooth. Be sure to sand the edges of the patch so that they are flush with the surrounding wall.

Step 7: Prime and Paint
Finally, prime and paint the repaired area to match the surrounding wall. Allow the paint to dry completely before using the wall again.

In conclusion, repairing drywall holes in corners is a quick and easy process that anyone can do with a few simple steps. With the right tools and a little patience, you can have your walls looking as good as new in no time.